New Husqvarna Tool Petrol power cutter
Some jobs require exceptional power. The K 1270 is a real powerhouse with an impressive 5,8 kW output, turning your heaviest cutting jobs into a fast and effective operation. Suitable for road works when used with the corresponding KV970/1270 trolley.
Superior power with low emissions
Patented X-torqTM engine that uses air to flush out the cylinder provides exceptional power but keeps fuel consumptions and emissions low.
Magnesium blade guard
Contributes to a light weight which gives an improved power-to-weight ratio. New stepless adjustment makes it easier to change cutting position.
Reduced wear
Reduced wear thanks to the drive belt with fully sealed transmission, which keeps out the cutting dust.
Cuts close to walls or ground
Possible thanks to the reversible cutting arm.
Maintenance-free air filter
The only time the filter needs to be checked and changed is if you experience lack of power.
Active Air Filtration™
Our two-step filtration system with centrifugal cleaning and a single paper filter increases product life and extends service intervals.
SmartCarb™
Our built-in automatic filter compensation maintains high power during the air filter life time.
Reversible cutting arm
The drive belt with fully sealed transmission keeps out cutting dust for reduced wear and allows close cutting to walls and floor.
Anti-vibration system
Reduced vibrations in the cutter handle for more comfort and longer operation periods.
Poly-V belt
Provides better transmission of power, less frequent re-tensioning and extended service intervals.
Blade retarder
Reduces the stop time of the blade when the machine is switched off, which enables you to quickly move on to the next job.
EasyStart
EasyStart ensures easier starting by reducing the compression in the cylinder.
Wet cutting kit
Less slurry and low water consumption thanks to the progressive water valve, this adjusts the water volume to the exact amount needed.
Engine
- Cylinder displacement 118.8 cm³
Equipment
- Blade diameter, max 400 mm
- Cutting depth, max 145 mm
Sound and noise
- Sound pressure level at operators ear 104 dB(A)
- Sound power level, guaranteed (LWA) 117 dB(A)